Get Professional Signage That Boosts Your Business Visibility, Fast & Hassle-Free!
Hotel Signs
Hotel signage for New York properties: guest room and floor identification, wayfinding to amenities, ADA-compliant restroom and exit signage, meeting and ballroom identification, and lobby and front desk branding. Installations are phased floor by floor and scheduled outside peak occupancy, coordinated directly with property management, so the property keeps selling rooms.
Every detail counts when it comes to the hospitality industry in NYC. The moment guests walk into your establishment, each step they take contributes to their perception and overall experience. As such, creating the right environment is important to enhancing their experience. This is where signage comes in.
Signs for hotels are more than just informative markers. They are silent ambassadors, providing guests with essential information at every turn. These signs can give instructions, directional cues, and more while blending seamlessly into your hotel environment.
A hotel orders more signs at once than almost any other kind of property, and guest room identification is the largest quantity item in the order. It is also permanent room identification, which brings it under the ADA standards: raised tactile characters, Grade 2 braille, a non-glare finish and the tactile baseline between 48 and 60 inches above the finished floor.
That volume changes where the risk sits. A specification error on a lobby sign is one sign. The same error on guest room identification is multiplied by the room count and found after the whole run is fabricated, which is why the room schedule is reconciled against the property’s actual room list before anything is produced.
Send us the room schedule, the brand standard if the property carries one, and your renovation or conversion date.
Front desk or lobby signs welcome guests into the hotel. They are the guest’s initial point of contact, which is why they often display important information and provide initial assistance. As one of the first signs guests see, these hotel lobby signs must be well-made and professional-looking.
These signs provide guests with important information, like room numbers and occupancy status. They are elegantly crafted, adding a touch of sophistication to each room.
These signs ensure smooth navigation within the hotel, guiding guests to the right floor. Whether you are indicating where elevators can be found or providing further instructions once they are safely inside an elevator, these signs will ensure a guest’s experience is seamless.
These essential signs indicate the location of the hotel’s restrooms, making it easier for guests to find them. They can be customized to align with the theme or brand of the hotel.
Wandering through a hotel can be daunting, especially for the first time. Wayfinding signs help guests easily find their way around. These signs are placed strategically throughout the property, providing clear directional cues.
Privacy is crucial for any hotel property. As such, “Do Not Disturb” signs are available to use. These offer a discreet way for guests to let the staff know their preferences for service. They are usually hung from door handles, indicating that guests should not be interrupted.
Hotels are a common venue for various events in New York, from weddings to conferences. Event signs can range in purpose, from wayfinding to decorative.
A hotel never closes, and that single fact shapes every signage project on a working property.
We do not take a property’s signage down all at once. Each floor is finished and guest-ready before the next one starts, which means old and new signage coexist for the duration, and the phasing plan has to make that look deliberate rather than half-finished.
Installations are scheduled outside peak occupancy windows, floor by floor and section by section, coordinated directly with property management on the calendar.
Every room that cannot be sold during an install has a real cost, and on most properties it is larger than the signage itself. Working room by room within a corridor, rather than closing a floor, is what keeps that number down.
Guest room numbering runs off a verified room schedule, not off the floor plan. Properties that have been renovated often have rooms that were combined, split or renumbered without the drawings being updated, and that mismatch is the most common source of wrong signs in a hotel order.
We work from architectural drawings and interior design specifications, and provide a signage schedule coordinated with the construction timeline.
Guest room identification is permanent room identification, which is what brings it under the ADA standards. A guest room door sign generally needs raised tactile characters and Grade 2 braille, with the baseline of the tactile text between 48 inches minimum and 60 inches maximum above the finished floor, a non-glare finish, and contrast between the characters and the background. The same applies to public restrooms, stairwells, exits and any other permanent space on the property.
Guest room signs are also the largest-quantity item in a hotel order, which changes the risk. A specification error on a lobby sign is one sign. The same error on guest room identification is multiplied by the room count, and it is found after the whole run is fabricated. That is the reason the room schedule gets reconciled first and a physical proof is approved before the full run goes into production.
Every braille dot, tactile letter and non-glare finish is produced in-house, so the specification is controlled by the same team that fabricates it. Full detail on the standards: ADA signs in NYC.
Three situations send a property back to its signage, and each is a different job.
The property changes brand, and every guest-facing sign has to carry the new flag’s standards: typeface, colour, material, mounting, and in many programmes exact dimensions. The brand standards manual is the specification and it is not open to interpretation. A flag change is also the one hotel signage job with a hard external deadline, because the conversion date is set by the brand rather than by the property.
New finishes throughout, and signage specified to match the new interior design rather than the old. The signage schedule tracks the trades rather than arriving after them.
More design freedom and far less specification, which sounds easier and is usually slower, because the decisions that a brand manual would have made now have to be made by the property. See rebranding.
Hotels sell meeting space, and the signage is part of what they are selling.
For ballrooms and meeting rooms, in the property’s own material and finish, with ADA tactile characters and braille where the room is a permanent space.
Showing what is in each room today, in a frame the property updates itself rather than a sign that has to be reordered every time the calendar changes.
Directing attendees from the entrance to the right room. On a property running several events at once, this is what keeps the front desk from becoming an information booth.
Conference organisers arrive with their own backdrops, banners and registration graphics, and the property’s rules on what can be attached to walls decide what they are allowed to install. We produce that side too: see event signage in NYC.
Guest room identification on every door, floor and elevator lobby signage with room ranges, wayfinding to amenities, restroom and exit signage meeting ADA requirements, meeting and event space identification, exterior and entrance signage, lobby and front desk branding, and back-of-house signage for staff areas. Guest room identification is the largest-quantity item and the one where ADA tactile and braille requirements apply.
Guest room identification is permanent room identification, so it generally requires raised tactile characters and Grade 2 braille, with the baseline of the tactile text between 48 and 60 inches above the finished floor, a non-glare finish, and contrast between the characters and the background. The same applies to public restrooms, stairwells and exits. This is general information rather than a code opinion on a specific property.
Yes, and it is how nearly every hotel signage project runs. Installations are phased floor by floor and section by section, scheduled outside peak occupancy windows and coordinated directly with property management, so the property keeps selling rooms. Within a floor we work corridor by corridor rather than closing the floor, because rooms taken out of service usually cost more than the signage does.
From a verified room schedule rather than from the floor plan. Renovated properties often have rooms that were combined, split or renumbered without the drawings being updated, and that mismatch is the most common cause of wrong signs in a hotel order. We reconcile the schedule against the property’s actual room list before fabrication, and approve a physical proof before the full run goes into production.
Yes. We work from brand guidelines including Pantone or CMYK colours, fonts, logo files and finish specifications, and from architectural drawings and interior design specifications where the signage is part of a build or a renovation. On a flag change the brand manual is the specification and we produce to it.
Yes, and we provide a signage schedule coordinated with the construction timeline, so the signage package tracks the build rather than arriving after it.
Both sides of it: the property’s permanent meeting and ballroom identification, and the temporary signage an event brings with it, including backdrops, registration graphics and event wayfinding.
From enhancing the guest experience to improving daily operations, the signs in NYC hotels serve a myriad of purposes, including:
At Street Style Sign Studio, we understand how the right sign can affect how people perceive your business. It’s no different in the hospitality industry. Elevate your hotel’s image with high-quality signs today. From hotel room signs to room service signs and more, our sign selection will ensure your hotel makes a lasting impression on all guests.